Skip to content
Weddings and events

How to make a wedding highlight video: structure, soundbites and a template to copy

Updated 13 min read

Short answer

To make a wedding highlight video, pick 8 to 15 soundbites from the vows and toasts, open on the strongest line and cover them with footage from the day, in 3 to 5 minutes. In FilmScribe, you read the ceremony as text, star the lines and, on Studio and Agency, get a paper edit and a cut timeline.

Step by step

  1. 01 Upload the ceremony and toasts The video or the lav audio, with the range set to just the dialogue: only that part is transcribed and counts toward your hours.
  2. 02 Shortlist the soundbites Read the transcript, filter for the strongest emotions, check Best Phrases by Impact and star every line that could make it.
  3. 03 Choose the opening and closing lines Compare your favorites as text, listen to each one and settle on the line that opens and the line that closes.
  4. 04 Ask for a paper edit On Studio and Agency, a Teaser or a Full film at the length you set, built only from lines people actually said.
  5. 05 Send the timeline to your editor On Studio and Agency, the cut timeline exports as .xml for Premiere Pro and DaVinci Resolve or .fcpxml for Final Cut Pro.
  6. 06 Cover it, add music and finish In your editor: B-roll, licensed music, color, the mix and the vertical version.
In this guide
  1. The short version
  2. How to make a wedding highlight video in FilmScribe, from the recorded ceremony to the timeline
  3. What each plan includes
  4. What’s the difference between a wedding teaser, a trailer and a highlight film?
  5. What is the structure of a wedding highlight film?
  6. A wedding highlight film template you can copy
  7. A filled-in example: a 60-second teaser and a 3-minute highlight
  8. How many soundbites should you use, and how do you choose the opening line?
  9. Music, pacing and B-roll: what stays in your editor?
  10. How do you make a vertical version for the couple to post?
  11. Same-day edit: what has to be ready beforehand?
  12. Other routes
  13. Common wedding highlight video mistakes
  14. Frequently asked questions
  15. Sources

The highlight film is the shortest way to tell a wedding day, and the hardest piece of the package to get right. Four minutes can’t hold the whole day: they hold a dozen lines, a few dozen shots and one song. Most of the work is deciding which lines make it and which one goes first.

This guide is for the wedding filmmaker who has already shot the day and is staring at hours of footage. It covers the structure of a short wedding film, the timing of each part at 1, 3 and 5 minutes, how many soundbites to use and how to pick the opener, with a template to copy and a filled-in example. FilmScribe handles the dialogue: you read the ceremony instead of scrubbing it and reach your editor with a rough cut. The full workflow, from backup to delivery, is in how to edit a wedding video.

The short version

DeliverableTypical lengthSoundbitesWhat goes in
Teaser (trailer)30 to 60 s3 to 5The opening line, the kiss, your strongest shots
Highlight film3 to 5 min8 to 15Opener, vows, rings, a toast, the reception
Feature filmAs agreed in the contractLong passagesCeremony, toasts and reception told as a story
  • Dialogue is the spine. Footage covers the dialogue, and music comes last.
  • On every FilmScribe plan: a transcript with each speaker separated, search, chapters, emotions with an intensity filter, Best Phrases by Impact and favorites.
  • On Studio and Agency: a Teaser or Full film paper edit built only from real lines, and a cut timeline for Premiere Pro, DaVinci Resolve and Final Cut Pro.
  • What we don’t do: we don’t pick music, we don’t suggest B-roll and we don’t find moments with no speech, like the processional and the first dance.

How to make a wedding highlight video in FilmScribe, from the recorded ceremony to the timeline

The steps start from finished recordings and end with your lines in order, inside your editor. They pay off most on a wedding video with a long ceremony and several toasts, where finding the right line costs more than cutting it.

1. Upload the ceremony and toasts, dialogue only

Upload the video, or the audio from the lav or the recorder, up to 10 GB per file. Links work for YouTube only, so wedding footage goes in as a file. Choose Wedding as the content type: it tunes the emotion vocabulary we look for.

Before processing, set the start and the end. Only that range is transcribed and counts toward your plan’s hours. Audio alone is enough for the transcript, emotions, paper edit and timeline. Vertical clips need the video. For a clean voice track, see how to record audio at a wedding.

2. Read instead of scrubbing, and shortlist

The ceremony comes back transcribed word by word, with each speaker separated and split into chapters. Three shortcuts speed up the read:

  • Search. “Promise” lands you in the vows. The bride’s name lands you in her father’s toast.
  • The Emotions page. The “Strongest only” filter leaves just the peaks, the Episode map shows where the ceremony builds, and Best Phrases by Impact sits at the bottom of the page, with up to 12 lines.
  • Favorites. Star every line that might make the cut. For a 4-minute highlight, pull 20 or so candidates.

Emotions come from the transcribed text. We don’t read faces or tone of voice, and a passage with no speech gets no emotion. More on the emotion detection page.

3. Choose the opening and closing lines

Turn on “Favorites only” and read your candidates in a row, as text. Then listen to each one: a line that reads well can have a laugh over it.

On Studio and Agency, an audio file gets a Hooks tab with the lines that stop a viewer, each scored for impact from 0 to 100. A video file has no Hooks tab: the scored automatic clips play that role on every plan (on Pro, the top-scored ones are locked). See narrative hooks.

4. Ask for a paper edit

On Studio and Agency, open the Scripts page, which is where FilmScribe drafts your paper edit. It asks “What will you deliver?” and offers two deliverables: Teaser, about 1 minute, which opens on a line that hooks, and Full film, at any length you set from 30 seconds to 120 minutes. There’s no deliverable called highlight film or trailer: for a 4-minute highlight, ask for a Full film at 4 minutes. The “Speech time” field is optional: fill it in if you want less talking and more picture than the draft proposes.

Add your favorites as required scenes. “See the possibilities” proposes 2 or 3 paths, each with the line that opens, the line that closes and the route between them. “Write directly” goes straight to the paper edit. It uses only what was said in the recording: no line is invented, and paper edits aren’t translated.

5. Send the cut timeline to your editor

Also on Studio and Agency, export a timeline from the paper edit or from your favorites: .xml for Premiere Pro and DaVinci Resolve, .fcpxml for Final Cut Pro. In Final Cut Pro, that’s File > Import > XML.

Each clip lands on its own words, with 0.5 s of handle before and after (adjustable from 0 to 5 s), a 1 s gap between clips (0 to 10 s) and a marker with its title and the speaker’s name. Media doesn’t travel with the file: the timeline points to the file you uploaded, and your editor relinks by file name. If you uploaded only the lav audio, the timeline has that audio only.

To get the cut on top of your cameras, choose “My synced timeline” when you export: send the timeline you already synced in your editor, the one whose audio we transcribed (.fcpxml or .xml), and tell us where that audio starts. We cut every track together, but we don’t sync anything: that part stays with you. Final Cut Pro multicam clips come in on their active angle, transitions become straight cuts and titles are left out, all listed in a warning. In an .xml from Premiere Pro or DaVinci Resolve, multicam clips aren’t read yet: flatten the multicam in a copy of the timeline before you export. See export to editors.

Pro has no paper edit and no timeline export. The route there is to download your favorites as MP3, the SRT for each passage and the text as TXT or PDF, with speaker and timecode, then assemble by timecode. Those timecodes count from the start of the range you set at upload, so add that start to find the line in your original file.

6. Cover it, add music and finish

What reaches your editor is the dialogue in the right order. The film comes from what you put over and under it: the shots, the song, the color and the mix.

To try this on one of your own weddings, the trial runs 3 days with 1 hour of footage and needs a card on file. There’s no free plan, and the trial becomes a subscription unless you cancel. During the trial you get 3 favorites and 3 passage downloads per file. More guides for filmmakers are on the weddings and events page.

What each plan includes

What you useProStudio and Agency
Transcript with speakers separated, search and chaptersYesYes
Emotions, Best Phrases by Impact, favorites and downloadsYesYes
Vertical clips with burned-in captionsUp to 15 min; the top-scored clips lockedUp to 25 min
Speaker names and named moments, like “Vows”NoYes
Hooks, Teaser or Full film paper editNoYes
Cut timeline as .xml or .fcpxmlNoYes

What we don’t do on any plan: we don’t pick music, we don’t suggest B-roll, we don’t grade or mix, we don’t clean up noise, we don’t sync cameras and we don’t find moments with no speech. The processional, the first dance and the drone shots are your calls, on your timeline.

What’s the difference between a wedding teaser, a trailer and a highlight film?

Every studio names its deliverables a little differently. The job each one does stays the same. The teaser, which many studios call a trailer, is the taste: it goes out within days, fits any platform and doesn’t try to tell the day. The highlight film is the story in short form, with a beginning, a middle and an end, and in most packages it’s the main deliverable. The feature film is the whole story, at the length the contract sets.

All three come from the same selects: the teaser uses the best three or four lines, the highlight uses a dozen and the feature uses nearly all of them. Every extra deliverable is edit time, and the wedding video pricing calculator helps you put that time in the price.

What is the structure of a wedding highlight film?

A short wedding film has five parts. They hold at 60 seconds and at 5 minutes: only the time each one gets changes.

  1. The opener. One strong line over a simple image. No logo, no title card, no 10-second drone shot.
  2. The introduction. Who these two are and how the day began: getting ready, the letter, a father seeing his daughter in the dress.
  3. The ceremony. The heart of the film: the processional, the vows, the rings, the kiss.
  4. The reception. The energy lifts: a piece of a toast, the cheers, the dance floor.
  5. The close. A line that looks ahead, the last shot and a card with the names and the date.

Timings for each part, as a starting point:

Part1-minute teaser3-minute highlight5-minute highlight
1. Opener0:00 to 0:080:00 to 0:200:00 to 0:30
2. Introduction0:08 to 0:180:20 to 0:500:30 to 1:20
3. Ceremony0:18 to 0:380:50 to 1:501:20 to 3:00
4. Reception0:38 to 0:521:50 to 2:403:00 to 4:20
5. Close0:52 to 1:002:40 to 3:004:20 to 5:00

The ceremony takes about a third of the runtime. That’s a starting point, not a standard. In a 30-second teaser the five parts shrink to three: the opening line, the kiss and the card.

What if the film doesn’t follow the day?

Reordering the lines makes different films from the same footage. In FilmScribe, wedding paper edits come in seven styles, plus a “Suggest one” option:

  • Chronological: the day already has a good arc.
  • Through-line: a letter or a promise the film keeps returning to.
  • In medias res: opens on the strongest vows, then builds back up to them.
  • Mirror: his vows and hers, set against each other.
  • Heritage: a tribute to grandparents, a dress that was her mother’s.
  • Light: laughter and warmth lead the film.
  • Documentary: the people tell the day in their own words.

A wedding highlight film template you can copy

Copy the block into your text editor or a spreadsheet and fill in one block per part.

COUPLE:
DELIVERABLE AND LENGTH: (60 s teaser, 3 min highlight, 5 min highlight)
FORMAT:                 (9:16 or 16:9)
MUSIC:                  (title, BPM, license)

FOR EACH PART
(1. Opener, 2. Introduction, 3. Ceremony, 4. Reception, 5. Close)
- Time in film:
- Line:
- Speaker and timecode in the recording:
- B-roll:
- Music:

END CARD (names and date):

BEFORE YOU EXPORT
- Does every line make sense without context?
- Do both partners speak?
- Does the music duck under every line?
- Does the music license cover the platform this is going to?

Timecode from one file, edit in another? The timecode calculator helps with the math.

A filled-in example: a 60-second teaser and a 3-minute highlight

The couple is fictional: Claire and Daniel, a 35-minute ceremony and 20 minutes of toasts.

60-second teaser

TimeLine, speaker and timecodeB-rollMusic
0:00 to 0:08“I didn’t know you could miss someone who’s standing right next to you.” Daniel, vows (12:31)Claire from behind, at the windowSolo piano, low
0:08 to 0:18No dialogueThe dress, the letter, her dad’s hugStrings come in
0:18 to 0:38“I promise to be your home on the days the world isn’t.” Claire, vows (16:05). “You may kiss the bride.” Officiant (27:40)The processional, the rings, the kissSwells on the kiss
0:38 to 0:52“To these two, who were family long before the paperwork.” Father of the bride, toast (52:10)The cheers, the hugs, the dance floorThe fullest section
0:52 to 1:00“We’re only getting started.” Daniel, vows (13:20)The send-off; end card with namesFinal note

That’s five lines and about 20 seconds of voice. After the strongest line, leave a second or two of picture and music alone.

3-minute highlight, with about ten lines

  • Opener, 0:00 to 0:20. The teaser’s opening line, in full, with Daniel’s pause.
  • Introduction, 0:20 to 0:50. Two lines from the letter Claire read while getting ready.
  • Ceremony, 0:50 to 1:50. Two passages from each set of vows, the rings and the kiss.
  • Reception, 1:50 to 2:40. Her father’s toast and one light line from the maid of honor.
  • Close, 2:40 to 3:00. “We’re only getting started.”

A teaser isn’t a shrunken highlight film: it keeps the lines that work without the others.

How many soundbites should you use, and how do you choose the opening line?

Start with voice time. In a short film, dialogue fills a third to half of the runtime.

LengthVoice timeSoundbites
60 s20 to 30 s3 to 5
3 min1 min to 1 min 30 s8 to 12
5 min1 min 40 s to 2 min 30 s12 to 15

A 6-second line runs 12 to 15 words at the pace people read vows. To check a longer one, use the words to minutes tool.

Where to look. The vows, letters read while getting ready, the officiant’s words and the toasts. The good line usually sits in the middle, once the nerves have settled.

The opening line passes three tests:

  1. It stands on its own. Someone who has never met the couple gets it without the sentence before.
  2. It carries emotion, not information. “I promise to be your home” opens a film. “We met in college” opens a slideshow.
  3. It fits in 4 to 8 seconds. Any longer and the picture ends up waiting for the line to finish.

The closing line looks ahead. A promise, a “forever,” an “only getting started.” If it comes from the voice that opened the film, the film comes full circle.

Balance the voices. Both partners need to speak. A guest gets one line.

Trim inside a line, never across lines. Cutting a hesitant start is editing. Splicing words from different sentences into something nobody said is not.

The full logging sheet is in how to do a paper edit.

Music, pacing and B-roll: what stays in your editor?

Pick the music after the lines. The opener and the couple’s tone point to the track. The BPM detector shows a track’s tempo and generates beat markers for your editor. Cut picture on the beat. Dialogue lands where the sentence needs it.

Use music licensed for the platform it’s going to. On YouTube, a copyright claim can block a video from being viewed, monetize it by running ads on it or track its viewership, depending on the rights holder’s settings. Instagram’s guidelines for music in video, published in 2020, say the greater the number of full-length recorded tracks in a video, the more likely it may be limited, and recommend shorter clips of music. Once the edit is locked, the music cue sheet lists every track on your timeline with its in, out and duration, which keeps your license requests in order.

Voice first. Duck the music under every line and let it rise in the gaps. Under the vows, use an instrumental section.

B-roll illustrates or contrasts, and never competes. Under “I promise to be your home,” joined hands work better than the dance floor. Plan coverage before the day with the wedding shot list. The moments with no speech, like the processional and the first dance, are ones you mark on your own timeline.

How do you make a vertical version for the couple to post?

There are two routes, and they deliver different things.

Reframe the teaser in your editor. Duplicate the sequence, switch it to 9:16 and reposition shot by shot. The result is the finished teaser, with B-roll and music, in vertical.

Pull a vow clip straight from FilmScribe. Select the line in the transcript and create a 9:16 clip, with burned-in captions in one of 235 styles. One of the 48 ready-made clip templates gives it a frame, and a text overlay carries the couple’s names. Framing that follows the speaker is in beta. That clip is continuous dialogue, with no B-roll and no music: it’s a captioned piece of the vows, not the finished teaser.

On Pro and during the trial, a clip runs up to 15 minutes. The trial includes 5 rendered clips in total, each with a FilmScribe bumper at the end. What you get is a file to download: we don’t post to social for you.

On YouTube, a square or vertical video up to three minutes long is categorized as a Short. What to post and in what order is in how to make wedding Reels.

Same-day edit: what has to be ready beforehand?

A same-day edit is a teaser screened at the reception itself, cut between the ceremony and dinner. What decides whether it works is what you prepared before the day.

  • The template half filled in: structure, length and end card already decided.
  • The music chosen and licensed, and a starter project open.
  • The must-have shot list in the hands of whoever is shooting.
  • The lav recording to its own file, easy to copy off quickly.
  • One person who only edits, and the projector tested before guests arrive.

In FilmScribe, nothing happens live. We transcribe a finished recording that you upload as a file. On the day, that depends on the venue’s internet connection, and we don’t promise a turnaround time. If you want to use it, upload just the audio of the vows, which is a far smaller file than the video, and test the connection ahead of time. Always keep the plan that doesn’t need us: marking lines by ear, with markers, during the ceremony.

Other routes

Straight in your editor, watch the ceremony with a finger on the marker shortcut and lift the good lines to a selects track. Or keep a logging sheet with timecode, speaker, line and use. For a small wedding, either is enough. FilmScribe earns its place when there’s a lot of dialogue, several weddings a month or a tight deadline.

Common wedding highlight video mistakes

  • Opening on a logo or title card. The first seconds belong to the line. Your name goes at the end.
  • Too many lines. Eight soundbites in 60 seconds leave no room to feel any of them.
  • Only one voice. A film with just one partner’s vows feels like someone is missing.
  • Splicing sentences. Building a promise nobody made breaks the couple’s trust in the film.
  • Leaving vertical for later. With no room in the frame, the reframe crops one of them out.
  • Exporting without checking the end card. A wrong name or date, on a video the couple is about to post.

Frequently asked questions

How long should a wedding highlight video be?

Three to five minutes is the common range, and a teaser runs 30 to 60 seconds. Those are industry habits, not rules: your contract decides. The shorter the film, the fewer lines it can carry. A 60-second teaser holds 3 to 5 soundbites, and a 4-minute highlight film holds around 10 to 12.

What's the difference between a wedding teaser, a trailer and a highlight film?

A teaser, which many studios call a trailer, is a taste of the day in under a minute, delivered within days for the couple to post. It doesn't tell the story. A highlight film runs 3 to 5 minutes and tells the day with a beginning, a middle and an end. Both are cut from the same selects.

How many soundbites go in a wedding highlight film?

Plan on 3 to 5 for a 60-second teaser, 8 to 12 for a 3-minute highlight and 12 to 15 for a 5-minute one. The math starts with voice time: dialogue fills a third to half of the film, and the rest is footage over music. Shortlist twice as many lines as you'll use.

How do I choose the opening line of a wedding film?

Look for a line that stands on its own, carries emotion instead of information and fits in 4 to 8 seconds. It usually sits in the middle of the vows or a toast, rarely at the start. In FilmScribe, the intensity filter on the Emotions page and Best Phrases by Impact shorten the search.

What music can I use in a wedding highlight video?

A track licensed for where the video will be posted. On YouTube, a copyright claim can block the video, monetize it by running ads on it or track its viewership. Instagram's guidelines say the more full-length recorded tracks a video has, the more likely it is to be limited. We don't pick or suggest music.

Does FilmScribe edit the wedding highlight video for me?

No. We handle the dialogue: the transcript, the strongest lines and, on Studio and Agency, a Teaser or Full film paper edit and a cut timeline for Premiere Pro, DaVinci Resolve or Final Cut Pro. B-roll, music, color and the mix stay in your editor. We don't find moments with no speech, like the processional.

Can I use FilmScribe for a same-day edit?

Only as a helper, and with a caveat. Nothing happens live: we transcribe a finished recording that you upload as a file. On the wedding day that depends on the venue's internet connection, and we don't promise a turnaround time. Test the connection beforehand and keep a plan that doesn't need us: marking lines by ear.

Sources

The official documentation behind the numbers and rules in this guide.

  1. 01Learn about copyright claims(opens in a new tab) · YouTube Help
  2. 02Updates and guidelines for including music in video(opens in a new tab) · Instagram
  3. 03Use XML to transfer projects in Final Cut Pro for Mac(opens in a new tab) · Apple
  4. 04Understand three-minute YouTube Shorts(opens in a new tab) · YouTube Help

Try it on your own recording. See the result before adding a card.

Upload a file or paste a YouTube link. Transcript, chapters, clips and captions are ready in minutes.